Various filament guides for the Geeetech Acrylic Prusa i3
Various filament guides for the Geeetech Acrylic Prusa i3 is a downloadable 3D printable model for spool holders and printer parts. Review the files, license, and creator attribution before printing.
Original creator description
The edges of the display board of the Geetech acrylic Prusa i3 are rather sharp and filament fed from behind the printer tends to rub against them or even get pulled in the corner the display board and teh main upper bridge forms. So I designed a few things that are supposed to make the filament run over that edge more smoothly. The objects are supposed to be clipped to the top of the display board, thus the 5mm slot. Check your calibration or a bit of filework may be needed for them to fit nicely. For easier printing, there is a version that is split in half, so that no support is necessary. The II files are a newer design that avoids the filament falling off the sides for larger prints. Y... This hosted file keeps creator credit and license details.
Topics and tags
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
File metadata
- FG_II.stl
SHA-256:
e32edd0654cec61d9c6045e5988f34464dd267195978c1f2f53b5d491ff39a26 - FilamentG_Low.stl
SHA-256:
b5939901cf981fdccb91dcacb0b32a0525ea91bc4b500b56cef3a502e05a9f02 - FilamentG_Up.stl
SHA-256:
7ce8a2e6ba7ea3c3f509f15653363b9adbec9a56eb57c7df7152d0e4aaa3b46d - FilamentGuide.stl
SHA-256:
62eacd6edac3ebbc08468bfc7f392edce2c9fe74ca8b37cc5fa12299d99f5941
Attribution
Various filament guides for the Geeetech Acrylic Prusa i3 by becka (the original source). License: Creative Commons CC0 1.0. Source: the original source