Free 3D printer models, ready to download and make.

Find printable files for repairs, organizers, tools, and everyday projects, with creator credit and source details included.

Browse models Upload a model

Latest models

Approved uploads and imports appear here from the database immediately.

Ducky The Lop Eared Bunny

Designed in the memory of Ducky the Lop Eared Bunny. Modeled with ZBrush, he's as cute as he is plastic. This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 1 file 18.2 MB

Loggerhead Sea Turtle (poseable)

A model loggerhead turtle with moveable flippers. You could call it an "action figure", but there's a distinct absence of mutation and/or martial arts training for this little guy! All four flippers are attached by ball joints that are captured during the printing process. The front and back halves of the model snap together with the included H-clip. Some cool info about loggerheads: http://www.youtube.com/watch?v=isjxWHoMz1E Just want to print it? Then "Loggerhead_plated.STL" is the file for you! Switch off automatic supports in your slicer software. There are only two supports needed and they're included in the STL. Don't forget to snap them off with pliers after printing. Plate it yourse... This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 4 files 66.9 MB

Wooly Sheep

Here is a small wooly sheep. It was created with 123D Catch from a ceramic garden ornament. The ornament contains reflective additions and is white and shiny - see image. It was dulled with fine chocolate powder to aid 123D Catch. This hosted file keeps creator credit and license details.

CC-BY-4.0 1 file 4.0 MB

Great White Skull

Hello world! In the spirit of this week's carnivorous chordates I've made a great white skull! These files are huge so I recommend tastefully resizing them down but the full size is pretty fun. I also used rafts on all of my prints but no supports, no glue. I hope you enjoy! This hosted file keeps creator credit and license details.

CC-BY-4.0 7 files 50.8 MB

Hollow Draudi

Printed with the BCN3D Sigma R19, an independent dual extruder machine: https://www.youtube.com/watch?v=q7UxQWz5Nm8 More awesome designs and prints: https://www.instagram.com/bcn3dtech/ The Hollow Draudi is designed to be created on resin 3D printers mainly due to their empty geometry. In addition, all orifices, modeled with Rhinoceros and Grasshopper, give it a unique personality and a plus of difficulty that will challenge any 3D printer FFF. Check out this cool timelapse printing the hollow draudi: https://www.youtube.com/watch?v=sWcapmmzpVg Check out our materials in BCN3D website: https://www.bcn3dtechnologies.com/en/3d-printer/filaments/ Follow us through our social media channels in... This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 1 file 40.3 MB

Floating photo frame

This photo frame would looks like that the photo is floating on the wall. This design is exactly the size of a traditional 4"×6"(KG). Please use the push-pin or the screw, either will be fine. This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 1 file 3.0 MB

Tube roller

An adaptation of alany's tube key the original source that includes a squasher frame and end cap to hold the key in place. The slot in the squasher is offset to help the tube go around the key. Updated June 2019 Anything marked v2 is the updated version. You'll still need the original key part. The cog is slightly larger, giving it a larger hole. As a result it is a loose fit on the key, which makes it easier to remove when you want to take an empty tube out. In use, the ratchet holds it in place, but it you want to make it permanent, a bit of super glue (CA) will lock it to the key. V2 of the frame has a beefier ratchet spring (it's still a thin bit of PLA, so it will al... This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 8 files 763.5 KB

OpenRC 1:10 4WD Truggy Concept RC Car

Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree Subscribe to my YouTube channel so you don´t miss out on the latest of my projects! - https://www.youtube.com/user/DanielNoree2 Awarded a GrabCAD Golden Gear for "Top Open Engineering Project 2013"! This an ongoing project of creating a free for all Open Source RC car that can be printed (to a certain extent of course) at your personal FDM printer at home! I have tried to keep the design basic for easy modification for others in their favourite CAD software Also, it's designed for FDM 3D printing. This is really a proof of concept and i´m very pleased with the result even if there is some work left to be done! CVD... This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 25 files 56.9 MB

Lockable Present Ornament

Instead of putting your presents beneath the tree, why not put them on the tree? This is an ornament that also functions as a reusable present box. It's lockable with a nice ornate key. In addition to the key, the ribbons also hold the lid on and add an extra puzzle nature to the box. It can be a fun challenge for young kids to try to figure out how to open it. I'm using this with my kids and they are very intrigued about what might be in the box. They're already asking for the key! I'm planning to put the keys in their stockings. Check out the video for how it works and how to assemble: http://www.youtube.com/watch?v=8MNviO8Qv2c This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 10 files 1.4 MB

BeQui, Jointed Robot

Bequi is an jointed robot 23cm high, has 16 joints. Among her favorite hobbies include to become a support for mobile and be the star of Stop Motion movies. - See more at: http://diwo.bq.com/en/bequi-the-first-printdoll-from-bq/ She are joined by elastic cords. Joining Bequi: https://www.youtube.com/watch?v=P-aYNbkBm-Y Author: https://www.soniaverdu.es This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 11 files 24.0 MB

Smartphone Holder

Update / As many of you suggested, I did a new version with a nicer rounded head, download the ReposeMan-V2.stl file. It's a first version, I think I will make it with a bigger front feet to enable anyone to plug the smartphone. This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 2 files 4.1 MB

Stretchy Bracelet

This bracelet has no clasp; instead you can stretch it over your hand and onto your wrist. It was inspired partially by the Springamathing: the original source . The design on the outside was inspired by MakeALot's link bracelet: the original source . UPDATE: At the request of nycdesigner, a couple of alternate designs are now also available. This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 4 files 6.5 MB

Bag Holder - Shopping Handle

This is a simple thing to help you carry your bags. It doesent hurt your finger, and is really elegant to use.. (=]) Use 10% of infill or more. If you like being the "Hulk", print with 70% and you will carry the World. This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 1 file 3.6 MB

The Amazing Gyroscopic Cube Gears!

Update - I have re-printed and assembled this and in the process made several changes to make this much easier to print and assemble. With the changes that I made, I only had a couple spots where I had very minor edge cleanup because of the first layer being squeezed for adhesion. I have removed the need for sanding and other finish work that was previously needed. (I do however still recommend lubrication). I also wrote a full set of assembly instructions with pictures detailing my process for assembly. I hope that this helps those who build this and I thank those who made it through the assembly with my previous version. End of Update-- Come one come all and witness the thrills of the Ama... This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 24 files 3.6 MB

Artichoke Lamp Shade

Inspired by the geometry of an artichoke and Louis Poulsen's great lighting studies and diagrams. This beautiful lamp shade is perfect for the home or business. You can use any standard hanging light cord and a low temp bulb (such as a cfl bulb.) We purchased a standard lamp base with a 12 ft cord from amazon and it screws in the top hole with no issues. 40% infill, high cooling, slow speed. May be tricky on some printers so you may need support for some of the lower fins. Notes: The model was created in 3ds Max 2011 but due to the inch/mm unit issues the model is scaled up by 2540%. Check out http://www.gcreate.com for information on our Large Format gMax 1.5 + 3D Printers This hosted file keeps creator credit and license details.

CC-BY-SA-4.0 1 file 722.8 KB

Snowflake

My father was a carpenter. When I was little he made a whole bunch of these intricate wooden Christmas tree ornaments that slitted together. So here is my MakerBot version of it. This hosted file keeps creator credit and license details.

CC-BY-4.0 2 files 649.7 KB

Dragon Pencil Cup [Cura 5.4 Tree Support]

The Improved tree supports now use less material and print faster, making them easier to remove and resulting in a cleaner final print. Also a big shout out to community member @ThomasRahm who originally proposed and created these new improvements. You can use this model to test the newly introduced settings: Maximum Branch Angle Trunk Diameter Branch Diameter Branch Diameter Angle Preferred Branch Angle Diameter Increase to Model Minimum Height to Model Initial Layer Diameter Branch Density Tip Diameter Limit Branch Reach Optimal Branch Range Rest Preference Are you curious to try it for yourself? Download UltiMaker Cura 5.4 here. Do you have some feedback for Cura? Leave a request on our... This hosted file keeps creator credit and license details.

CC-BY-4.0 1 file 47.7 MB

Knurled surface finishing library

YAPML yet another poor man's library that makes things finding it hard to render and taking its time to compile. In this case the self-replicating polyhedron is intended to give a mechanical touch to your freshly (or not) designed cylindrical surfaces. Hmmmm... you can also thing that those things all-around the cylinder are diamonds and use it for jewelry. The examples scad provided uses OpenSCAD MakerBot Font Module by grokbeer licensed under BY-SA-NC license (link in the instructions section) Photos... http://aubenc.imgur.com/knurled_finish_surface UPDATE: (Just in case you don't read the comments bellow) Video by sirmakesalot (thank you very much!!)... http://www.youtube.com/watch?v=uz8... This hosted file keeps creator credit and license details.

CC-BY-4.0 4 files 2.9 MB

"I Love You" Box

A circular trinket/present box with the words "I LOVE YOU" embossed in the style of Morris/Goudy around the outside. There is a plain lid, or if you prefer, a lid with space for an insert of your loved one's initial printed separately and pressed in. As an alternative to the lettered lid insert, a customised message can be made from any image/drawing maybe a child's drawing or personal message. To make your own lid insert: Make sure your image is square (the more pixels the better) Drop it on http://3dp.rocks/lithophane Set Max Size (MM) = 60, Thickness (MM) = 4, Border (MM) = 1.6, Thinnest layer (MM) = 0.6, Vectors per Pixel = 5, Base/Stand depth = 0, Form = "Flat, mirror Neg.". Then click... This hosted file keeps creator credit and license details.

CC-BY-4.0 25 files 789.0 MB

Gyroscopic Snowflake

Q: What do you get if you cross a snowflake with a gimbal? A: A gyroscopic snowflake! It actually works! Can there be any better Christmas decoration? There are three variants: -small , (Gimbal snowflake star small.STL) -medium (Gimbal snowflake star.STL) and -big (Gimbal snowflake.STL). Update I: I made an other one: Small, shape of a snowflake and a little thinner. Quick to print. (Gimbal snowflake small and flat.STL), see the original source Update II: If snowflakes within snowflakes (flakeception?) are a thing you are into, then check out my other snowflake thing: Shadowflake the original source This hosted file keeps creator credit and license details.

CC-BY-4.0 4 files 413.4 KB

Cable Spool

Simple but effective cable spool. STL is high res, so you can scale it up to whatever size you want. Low res files are also available if the high res files are to big for you. This hosted file keeps creator credit and license details.

CC-BY-4.0 4 files 151.6 MB

Glasses

I always break my glasses by falling on the ground or sitting on them... I was tired of buying a new pair of glasses every time, so I decided to 3d print them. Easy task, but first I had to draw them. So I reused the lenses, but redesigned the shape and joints. Front face has to be printed as flat, I bent it using a little heat from hair dryer after print. It brings better results, than trying to print it bent with the supports. Temples are attached using two small pieces of 1.75mm filament, so I could avoid the problem with tiny screws. Now I have a lot of fancy color combinations, but my favorite shape, so wearing glasses became a fun, not just necessity. I understand, that everybody need... This hosted file keeps creator credit and license details.

CC-BY-4.0 4 files 1.6 MB

Ares

"It makes no difference what men think of war... War endures. As well ask men what they think of stone. War was always here. Before man was, war waited for him. The ultimate trade awaiting its ultimate practitioner." —Cormac McCarthy, Blood Meridian This is my 3D capture of the Skulpturhalle Basel museum’s plaster cast, “Head of Ares.” That 19th-century cast was molded from the Munich Glyptothek’s 2nd-century BC marble head of Ares. It is in the same style as the Louvre’s famous full-figure Ares Borghese . Griffins, dogs, and a sphinx decorate Ares’ helmet, but the sphinx mohawk is a 19th-century reconstruction based on similar depictions of Ares that has since been removed from the Munich... This hosted file keeps creator credit and license details.

CC-BY-4.0 2 files 84.7 MB

His and Her Owls

My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J_TeOsF4M_F5pPPJQ As a gift for two friends of mine who's wedding I am officiating, I slightly modified and printed these two owls based (almost completely) on the excellent model by Cushwa. I just added the top hat and flower head-band. Enjoy! This hosted file keeps creator credit and license details.

CC-BY-4.0 1 file 38.9 MB

View all 1,258 models