Fostruder H4 - Dual Drive Extruder
Fostruder H4 - Dual Drive Extruder is a downloadable 3D printable model for cable organizers and printer parts. Review the files, license, and creator attribution before printing.
Original creator description
Dual motor, dual drive bowden extruder. Uses two NEMA14 motors and two drive gears. The two motors should be wired to run in opposite directions, and can be wired in serial or parallel (I would tend to wire the motors in series on a 24V printer and parallel on the 12V printer, but it will also depend on the motors and drivers). Two screws are used to adjust the gap between the gears, or small springs* can be used for a constant tension configuration. Here are the parts I used: 2 x 0.8A NEMA14 Motors 2 x Stainless steel extruder gears* 1 x Bowden Coupler M3 Screws (two M3x20, four M4x30 socket cap screws) More info about several other dual drive bowden extruders I've just uploaded on thrinte... This hosted file keeps creator credit and license details.
Topics and tags
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
File metadata
- Foststuder_H4.stl
SHA-256:
ddf5ecc740ca5ebaee625cc95f8617c7e3fbe3145557ba9474cbee40c9885d5c - Foststuder_H4_-_Mirrored.stl
SHA-256:
e46a2c6ff35f146cbf6daf79d1d432509601500b4e95bcf9f3fdc9aa2442a398 - Nema14-33_Horizontal_Clamp.stl
SHA-256:
6c22148b6f05dd4db89f96c3a0b2aa48e2ea864e76406a2701a60bfc83b8cc3a
Attribution
Fostruder H4 - Dual Drive Extruder by walter (the original source). License: Creative Commons CC0 1.0. Source: the original source