Air compressor part cooler
Air compressor part cooler is a downloadable 3D printable model. Review the files, license, and creator attribution before printing.
Original creator description
This part is designed for Replicator 2x E3D-v6 bowden Upgrade . I got tired of tiny cooler fans with weak air flow and bought myself a 60l/min air compressor (designed for fish tanks) This one . It is relatively quiet (compared to piston compressors). The part is meant to be as simple as possible (I failed), no screws required, the air ducts just slide to the carriage from the sides. I use 10 mm OD 8 mm ID PVC hose. Print two air_pump_cooler_mkbot2x.stl on side (one should be mirrored) and an air tee (or just print prepared stl . File edges if necessary and assemble everything as shown on photos =). Source freeCAD files are attached, but they are messy! The air flow is not optimal still, bu... This hosted file keeps creator credit and license details.
Topics and tags
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
File metadata
- 10mm_air_tee.stl
SHA-256:
7fc42811fb3e591aea4485fdb2e00bfbc9d0797d9bf9fd7311c54783400b30ae - air_pump_cooler_mkbot2x.stl
SHA-256:
26b49e81877ef421bfd20b2df20bc60199564c2cf535c27108f63cad33453562 - air_pump_cooler_mkbot2x_prepared.stl
SHA-256:
5cb8da474bb4a13a51f10cc3835885a1e93cfa4281f683a66a3b58e0b1789526
Attribution
Air compressor part cooler by satary (the original source). License: Creative Commons CC0 1.0. Source: the original source