Spool Rack
A printable multi-part rack for organizing filament spools.
3D-Printed.org notes
A generic storage accessory. Check fit, stability, and print strength for your intended use; no load rating is provided.
Original creator description
I am new to 3D printing and though it was a good idea to make something useful in putting together my 3D print shop. I used PLA for the main structure but highly recommend to print it in PETG if you want it to last for a long time, for the assembles and the caps I decided to use a flexible material; because there are some assemble tolerances that require a little bit of pressure, and the only one I could get locally at a reasonable price was a TPE called NinjaFlex. I learned flexible materials have some challenges, and in the case of the NinjaFlex filament you have to print it very, very slow to get some decent results, after some twicking in temperature and speed the results were very good... This hosted file keeps creator credit and Creative Commons CC0 1.0 details.
Topics and tags
Popularity
23 downloads from 3D-Printed.org.
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
File metadata
- Axis_cap.stl
SHA-256:
8459f64b7776974043a2b1ccf8335b5d1f7dad9bdecbfc27dba986216cddc7d4 - Axix_assemble.stl
SHA-256:
8ac543745c318124dbdf4a1829b4246659dd26940fca700221d030941cb0e803 - Base_tube_assemble.stl
SHA-256:
1efb1c19f58f0e5ed1170f4bbcd0654fe026337cf518112bfb997d663748c67e - Triangle_support.stl
SHA-256:
c518e1fda135e64ebd854422c9e4c33edf49f6cd536494d6960890dfe9eb52d4
Community
Ask questions, share a finished print, add a remix, watch updates, or report an issue.
Comments
- No comments yet.
Makes and photos
- No makes have been approved yet.
Remixes
- No remixes have been approved yet.
Report this model
Attribution
Creative Commons CC0 1.0. No attribution is required.