Clamp for 6mm 2GT / GT2 white steel reinforced belt
Clamp for 6mm 2GT / GT2 white steel reinforced belt is a downloadable 3D printable model with hosted files, creator attribution, and Creative Commons CC0 1.0 details.
Original creator description
Don't like using zip ties, so created this. This is a belt clip/clamp for a steel reinforced white polyurethane 2GT belt. The white belt is thicker than a regular rubber 2GT belt, so if printed as is will be too loose for rubber belts. Tapered 0.5 degrees and filleted at the top for easier belt insertion. Here are the dimensions, so one could scale as needed: Length: 12mm Hole width: at the bottom - 6.1mm, top - 6.304mm Hole height: at the bottom - 3.05mm, top - 3.254mm Wall thickness throughout: 0.8mm (2 walls using 0.4mm nozzle) Moisten belt with water when inserting. Once dry it won't slip. This hosted file keeps creator credit and Creative Commons CC0 1.0 details.
Topics and tags
Popularity
6 downloads from 3D-Printed.org.
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
- 6mm_belt_clamp.stl
STL · 15.9 KB
Download
File metadata
- 6mm_belt_clamp.stl
SHA-256:
260fdf77958a18e75311be7f94ca8912fb93c86ad752cfdbe35e4a40ff758704
Community
Ask questions, share a finished print, add a remix, watch updates, or report an issue.
Comments
- No comments yet.
Makes and photos
- No makes have been approved yet.
Remixes
- No remixes have been approved yet.
Report this model
Attribution
Clamp for 6mm 2GT / GT2 white steel reinforced belt by vl777 (the original source). License: Creative Commons CC0 1.0. Source: the original source