Birdhouse on a Rail (with Pond)
Birdhouse on a Rail (with Pond) is a downloadable 3D printable model with hosted files, creator attribution, and Creative Commons CC0 1.0 details.
Original creator description
This Birdhouse is designed to be placed on a Rail. Adjust the .step file and create your own .stl files if the Dimensions of the Rail do not fit your Rail. 27mm for the larger Part 20mm for the smaller Part (details see concept picture) It is necessary to print the Support Part 2 times. To attach the Support below the Plattform 4x M5 screws are necessary. Use a bit of cardboard between the Support and the Rail to generate some tension. The Birdhouse can be used to place loose seeds or balls The small Pond can be used as a Birdbath or watering station for the Birds. (if you use loose seeds, you might need to clean out some seeds from it periodically) Fill up the Water when empty ;-D The Roof... This hosted file keeps creator credit and Creative Commons CC0 1.0 details.
Topics and tags
Popularity
8 downloads from 3D-Printed.org.
Print details
- Difficulty
beginner
- Materials
PLA suggested; confirm scale and supports in your slicer before printing.
Download files
File metadata
- Birdhouse_with_pond_v1.step
SHA-256:
2e8178860203b3a3661b54e1698c8bfbcf893f1eb42a9c8ec46cfc58417c04ce - Plattform_v1.stl
SHA-256:
63459124ac18022859cc2c520b1afb9fe34258ff80780a792f0bdd246dafe795 - Roof_v1.stl
SHA-256:
bf16e02b6da5020e04fc6e5dc693927d86fba444287f86eadd369e1973e337ce - Support-below_v1print_2x.stl
SHA-256:
a4eded03cf27e9b805ee1352d2801dc2813ee7a193a7cca3db06007b5a09b4ae
Community
Ask questions, share a finished print, add a remix, watch updates, or report an issue.
Comments
- No comments yet.
Makes and photos
- No makes have been approved yet.
Remixes
- No remixes have been approved yet.
Report this model
Attribution
Birdhouse on a Rail (with Pond) by ziska_b (the original source). License: Creative Commons CC0 1.0. Source: the original source