Creative Commons Models 3D models
Redistributable Creative Commons 3D models with creator credit, license details, and hosted files.
Ducky The Lop Eared Bunny
Designed in the memory of Ducky the Lop Eared Bunny. Modeled with ZBrush, he's as cute as he is plastic. This hosted file keeps creator credit and license details.
Loggerhead Sea Turtle (poseable)
A model loggerhead turtle with moveable flippers. You could call it an "action figure", but there's a distinct absence of mutation and/or martial arts training for this little guy! All four flippers are attached by ball joints that are captured during the printing process. The front and back halves of the model snap together with the included H-clip. Some cool info about loggerheads: http://www.youtube.com/watch?v=isjxWHoMz1E Just want to print it? Then "Loggerhead_plated.STL" is the file for you! Switch off automatic supports in your slicer software. There are only two supports needed and they're included in the STL. Don't forget to snap them off with pliers after printing. Plate it yourse... This hosted file keeps creator credit and license details.
Wooly Sheep
Here is a small wooly sheep. It was created with 123D Catch from a ceramic garden ornament. The ornament contains reflective additions and is white and shiny - see image. It was dulled with fine chocolate powder to aid 123D Catch. This hosted file keeps creator credit and license details.
Great White Skull
Hello world! In the spirit of this week's carnivorous chordates I've made a great white skull! These files are huge so I recommend tastefully resizing them down but the full size is pretty fun. I also used rafts on all of my prints but no supports, no glue. I hope you enjoy! This hosted file keeps creator credit and license details.
Hollow Draudi
Printed with the BCN3D Sigma R19, an independent dual extruder machine: https://www.youtube.com/watch?v=q7UxQWz5Nm8 More awesome designs and prints: https://www.instagram.com/bcn3dtech/ The Hollow Draudi is designed to be created on resin 3D printers mainly due to their empty geometry. In addition, all orifices, modeled with Rhinoceros and Grasshopper, give it a unique personality and a plus of difficulty that will challenge any 3D printer FFF. Check out this cool timelapse printing the hollow draudi: https://www.youtube.com/watch?v=sWcapmmzpVg Check out our materials in BCN3D website: https://www.bcn3dtechnologies.com/en/3d-printer/filaments/ Follow us through our social media channels in... This hosted file keeps creator credit and license details.
Floating photo frame
This photo frame would looks like that the photo is floating on the wall. This design is exactly the size of a traditional 4"×6"(KG). Please use the push-pin or the screw, either will be fine. This hosted file keeps creator credit and license details.
Tube roller
An adaptation of alany's tube key the original source that includes a squasher frame and end cap to hold the key in place. The slot in the squasher is offset to help the tube go around the key. Updated June 2019 Anything marked v2 is the updated version. You'll still need the original key part. The cog is slightly larger, giving it a larger hole. As a result it is a loose fit on the key, which makes it easier to remove when you want to take an empty tube out. In use, the ratchet holds it in place, but it you want to make it permanent, a bit of super glue (CA) will lock it to the key. V2 of the frame has a beefier ratchet spring (it's still a thin bit of PLA, so it will al... This hosted file keeps creator credit and license details.
OpenRC 1:10 4WD Truggy Concept RC Car
Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree Subscribe to my YouTube channel so you don´t miss out on the latest of my projects! - https://www.youtube.com/user/DanielNoree2 Awarded a GrabCAD Golden Gear for "Top Open Engineering Project 2013"! This an ongoing project of creating a free for all Open Source RC car that can be printed (to a certain extent of course) at your personal FDM printer at home! I have tried to keep the design basic for easy modification for others in their favourite CAD software Also, it's designed for FDM 3D printing. This is really a proof of concept and i´m very pleased with the result even if there is some work left to be done! CVD... This hosted file keeps creator credit and license details.
Lockable Present Ornament
Instead of putting your presents beneath the tree, why not put them on the tree? This is an ornament that also functions as a reusable present box. It's lockable with a nice ornate key. In addition to the key, the ribbons also hold the lid on and add an extra puzzle nature to the box. It can be a fun challenge for young kids to try to figure out how to open it. I'm using this with my kids and they are very intrigued about what might be in the box. They're already asking for the key! I'm planning to put the keys in their stockings. Check out the video for how it works and how to assemble: http://www.youtube.com/watch?v=8MNviO8Qv2c This hosted file keeps creator credit and license details.
BeQui, Jointed Robot
Bequi is an jointed robot 23cm high, has 16 joints. Among her favorite hobbies include to become a support for mobile and be the star of Stop Motion movies. - See more at: http://diwo.bq.com/en/bequi-the-first-printdoll-from-bq/ She are joined by elastic cords. Joining Bequi: https://www.youtube.com/watch?v=P-aYNbkBm-Y Author: https://www.soniaverdu.es This hosted file keeps creator credit and license details.
Smartphone Holder
Update / As many of you suggested, I did a new version with a nicer rounded head, download the ReposeMan-V2.stl file. It's a first version, I think I will make it with a bigger front feet to enable anyone to plug the smartphone. This hosted file keeps creator credit and license details.
Stretchy Bracelet
This bracelet has no clasp; instead you can stretch it over your hand and onto your wrist. It was inspired partially by the Springamathing: the original source . The design on the outside was inspired by MakeALot's link bracelet: the original source . UPDATE: At the request of nycdesigner, a couple of alternate designs are now also available. This hosted file keeps creator credit and license details.
Bag Holder - Shopping Handle
This is a simple thing to help you carry your bags. It doesent hurt your finger, and is really elegant to use.. (=]) Use 10% of infill or more. If you like being the "Hulk", print with 70% and you will carry the World. This hosted file keeps creator credit and license details.
The Amazing Gyroscopic Cube Gears!
Update - I have re-printed and assembled this and in the process made several changes to make this much easier to print and assemble. With the changes that I made, I only had a couple spots where I had very minor edge cleanup because of the first layer being squeezed for adhesion. I have removed the need for sanding and other finish work that was previously needed. (I do however still recommend lubrication). I also wrote a full set of assembly instructions with pictures detailing my process for assembly. I hope that this helps those who build this and I thank those who made it through the assembly with my previous version. End of Update-- Come one come all and witness the thrills of the Ama... This hosted file keeps creator credit and license details.
Artichoke Lamp Shade
Inspired by the geometry of an artichoke and Louis Poulsen's great lighting studies and diagrams. This beautiful lamp shade is perfect for the home or business. You can use any standard hanging light cord and a low temp bulb (such as a cfl bulb.) We purchased a standard lamp base with a 12 ft cord from amazon and it screws in the top hole with no issues. 40% infill, high cooling, slow speed. May be tricky on some printers so you may need support for some of the lower fins. Notes: The model was created in 3ds Max 2011 but due to the inch/mm unit issues the model is scaled up by 2540%. Check out http://www.gcreate.com for information on our Large Format gMax 1.5 + 3D Printers This hosted file keeps creator credit and license details.
Snowflake
My father was a carpenter. When I was little he made a whole bunch of these intricate wooden Christmas tree ornaments that slitted together. So here is my MakerBot version of it. This hosted file keeps creator credit and license details.
Dragon Pencil Cup [Cura 5.4 Tree Support]
The Improved tree supports now use less material and print faster, making them easier to remove and resulting in a cleaner final print. Also a big shout out to community member @ThomasRahm who originally proposed and created these new improvements. You can use this model to test the newly introduced settings: Maximum Branch Angle Trunk Diameter Branch Diameter Branch Diameter Angle Preferred Branch Angle Diameter Increase to Model Minimum Height to Model Initial Layer Diameter Branch Density Tip Diameter Limit Branch Reach Optimal Branch Range Rest Preference Are you curious to try it for yourself? Download UltiMaker Cura 5.4 here. Do you have some feedback for Cura? Leave a request on our... This hosted file keeps creator credit and license details.
Knurled surface finishing library
YAPML yet another poor man's library that makes things finding it hard to render and taking its time to compile. In this case the self-replicating polyhedron is intended to give a mechanical touch to your freshly (or not) designed cylindrical surfaces. Hmmmm... you can also thing that those things all-around the cylinder are diamonds and use it for jewelry. The examples scad provided uses OpenSCAD MakerBot Font Module by grokbeer licensed under BY-SA-NC license (link in the instructions section) Photos... http://aubenc.imgur.com/knurled_finish_surface UPDATE: (Just in case you don't read the comments bellow) Video by sirmakesalot (thank you very much!!)... http://www.youtube.com/watch?v=uz8... This hosted file keeps creator credit and license details.
"I Love You" Box
A circular trinket/present box with the words "I LOVE YOU" embossed in the style of Morris/Goudy around the outside. There is a plain lid, or if you prefer, a lid with space for an insert of your loved one's initial printed separately and pressed in. As an alternative to the lettered lid insert, a customised message can be made from any image/drawing maybe a child's drawing or personal message. To make your own lid insert: Make sure your image is square (the more pixels the better) Drop it on http://3dp.rocks/lithophane Set Max Size (MM) = 60, Thickness (MM) = 4, Border (MM) = 1.6, Thinnest layer (MM) = 0.6, Vectors per Pixel = 5, Base/Stand depth = 0, Form = "Flat, mirror Neg.". Then click... This hosted file keeps creator credit and license details.
Gyroscopic Snowflake
Q: What do you get if you cross a snowflake with a gimbal? A: A gyroscopic snowflake! It actually works! Can there be any better Christmas decoration? There are three variants: -small , (Gimbal snowflake star small.STL) -medium (Gimbal snowflake star.STL) and -big (Gimbal snowflake.STL). Update I: I made an other one: Small, shape of a snowflake and a little thinner. Quick to print. (Gimbal snowflake small and flat.STL), see the original source Update II: If snowflakes within snowflakes (flakeception?) are a thing you are into, then check out my other snowflake thing: Shadowflake the original source This hosted file keeps creator credit and license details.
Cable Spool
Simple but effective cable spool. STL is high res, so you can scale it up to whatever size you want. Low res files are also available if the high res files are to big for you. This hosted file keeps creator credit and license details.
Glasses
I always break my glasses by falling on the ground or sitting on them... I was tired of buying a new pair of glasses every time, so I decided to 3d print them. Easy task, but first I had to draw them. So I reused the lenses, but redesigned the shape and joints. Front face has to be printed as flat, I bent it using a little heat from hair dryer after print. It brings better results, than trying to print it bent with the supports. Temples are attached using two small pieces of 1.75mm filament, so I could avoid the problem with tiny screws. Now I have a lot of fancy color combinations, but my favorite shape, so wearing glasses became a fun, not just necessity. I understand, that everybody need... This hosted file keeps creator credit and license details.
Ares
"It makes no difference what men think of war... War endures. As well ask men what they think of stone. War was always here. Before man was, war waited for him. The ultimate trade awaiting its ultimate practitioner." —Cormac McCarthy, Blood Meridian This is my 3D capture of the Skulpturhalle Basel museum’s plaster cast, “Head of Ares.” That 19th-century cast was molded from the Munich Glyptothek’s 2nd-century BC marble head of Ares. It is in the same style as the Louvre’s famous full-figure Ares Borghese . Griffins, dogs, and a sphinx decorate Ares’ helmet, but the sphinx mohawk is a 19th-century reconstruction based on similar depictions of Ares that has since been removed from the Munich... This hosted file keeps creator credit and license details.
His and Her Owls
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J_TeOsF4M_F5pPPJQ As a gift for two friends of mine who's wedding I am officiating, I slightly modified and printed these two owls based (almost completely) on the excellent model by Cushwa. I just added the top hat and flower head-band. Enjoy! This hosted file keeps creator credit and license details.
WALLY - Wall Plate Customizer
CUSTOMIZER CHALLENGE CONTEST WINNER - Useful Category Update v1.3: Added 3 plate sizes "Standard", "Junior-Jumbo", and "Jumbo". If you've got a larger hole in your wall these may help. So here it is, my first model designed in OpenSCAD. I found something that would really benefit from being a parametrically designed model: Wall Plates. I've created a OpenSCAD model that allows you to pick from a list of 18 types of connector/outlet style which then generates a 3D model correctly oriented and modeled to be immediately 3D printed. So what options did I include in this file? Well I’ve allowed the user to pick any width from 1 to 5 “plates†wide. These were measured off the standard elect... This hosted file keeps creator credit and license details.
VEND - the totally printed candy dispenser
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J_TeOsF4M_F5pPPJQ Here is my Magnum Opus for the week! VEND is a totally 3D Printed candy dispenser that accepts quarters and rejects other coins. VIDEO: http://youtu.be/IWuvwcfnGFE Not only that, it has been designed so that once the loops in the back are secured with a padlock or whatever, it can't come apart (without damage). The back hatch secures the money and access to the coin mechanism's locking pins. The collar around the jar keeps the jar from being removed. The hole on the top will take a preserving lid ring for a standard "medium" Mason jar. That lets you thread the jar to the top, and the collar will secure it in pl... This hosted file keeps creator credit and license details.
Pump Hand Drill
Just for the record, I have always credited Performance 3D for the original concept and said this was my rendition of their drill as it was not available for download at that time. Since I designed my version and posted it here, they have made their version available on their web site. 3Dprint.com wanted to do an article on it and I declined and pointed them to Performance 3D. So I am NOT trying to take credit for it. I only wished to share a design that I admired and which was not available for download at that time. My rendition of a hand drill received from Performance 3D LLC Added 3 chuck sizes Video here: http://youtu.be/ut9gKJPn2f4 This hosted file keeps creator credit and license details.
Ocarina - fully playable
Functional "sweet potato" style ocarina. English 5-hole fingering. Plays A4 - B5 -- might be some variation/error depending on your printer. Was surprised not to see any examples of working printable traditional-form ocarinas up here, so I made this up. Let me know what you think, or recommend any changes. If anyone's interested, I'll make some alternate versions (fingering patterns, shapes, keys). edit-- whoa, wasn't expecting this much attention. If you like this thing, tips are appreciated. I really need to buy a "real" ocarina to use as a model to have an easier time making different ocarina styles. doge: D9z5ow3gdANRjB9t6LzZ6abHRSbLWfCG5a btc: 13aNJBe4SAKhaALa9cnszfPWhSxvhz95n6 This hosted file keeps creator credit and license details.
Swiss Army Style SD Holder (Expandable)(Raspberry adaptors)
IT'S BEEN 8 YEARS! READ THE DESCRIPTION BEFORE COMPLAINING. TOLERANCES ARE TIGHT - YOU MAY NEED TO SCALE UP 2% READ THE FULL DESCRIPTION BEFORE COMPLAINING!!! ----DESIGN INTENDED FOR ABS!------ ------Update 14/1/2020 --------- Added Spacer for use with mirrored trays. Note - no mirrored parts included. use the mirror feature in your slicer. ------Updates 19/6/2017--------- I'm happy to announce the creation of a DS/3DS version Find it here: the original source Also see this video update: https://youtu.be/fuimfDkY1KQ If the update video leaves you with questions about my brother - See this video: www.youtube.com/watch?v=JzMiJ691Y50&t=16s However... someone has been kind... This hosted file keeps creator credit and license details.
3D printed mechanical Clock with Anchor Escapement
This mechanical clock demonstrates that 3d-printing is not just for decoration. It's possible to create intelligent, living things. The clock has an anchor escapement, and a balance-wheel with a spiral spring. The clock shows Seconds, Minutes, and Hours. The winding has a nested planetary gear, which allows that the clock continues to run, while winding up. Everything is 3d-printed (even the spiral spring), except e few small screws, some metal pins, the cord, and the lead for the weight. This video shows the clock and the building process (actually with a simpler ratchet-winding): http://youtu.be/HgZBPYJ2Y-w Designed with Blender. PLA printed with Rapman 3.2. Some parts require a loose cle... This hosted file keeps creator credit and license details.
Screwless Heart Gears
UPDATE: There is a new version of this design which is more reliable to print and easier to assemble. I highly recommend you use it instead: the original source At last, here is the much-requested 100% printable heart gears. No more ugly bolt holes! This was designed along the same lines as the screwless cube gears: the original source , and in fact uses the exact same center block (though the pins are slightly shorter). UPDATE: If you lack a 3D printer, you can now buy these from CarryTheWhat at http://www.etsy.com/shop/CarryTheWhat . The size has been increased a bit from the previous version to accommodate the printed pins, so it now measures 100mm... This hosted file keeps creator credit and license details.
Preassembled Secret Heart Box
UPDATE: I have new a much better version of this design here: the original source I really enjoyed Eric Young's design of his Secret Heart Box, but I didn't relish hunting down all the required parts to put it together. One thing I learned from designing the Blossoming Lamp is that it's entirely possible to 3D print complex, preassembled mechanisms without breaking the 45-degree rule. I took it as a challenge to show that it's possible even with something as seemingly complex as this locking heart box. See the video here: http://youtu.be/PPqLB-bv4gY UPDATE: By popular demand, I've modified the customizer code so you can now add words to the top of the heart. Make sure y... This hosted file keeps creator credit and license details.
Cable Chain
This is a derivation of the "Enclosed Cable Carrier" by Landru It is larger. Hinge geometry changed for better movement, it takes more force to separate the links. Completely redrawn (I've forgotten all that I changed). Two styles of end pieces created. This hosted file keeps creator credit and license details.
Sliding Door bolt Print fully assembled
Make sure to check out the original source for add-ons for this thing. This includes alternative fixings and spacers for the main bolt and standard receiver. Update 6 July 2020. I've added a sliding bolt release tool. Print 100% infill. Place part with hole on a solid surface, put bolt in bolt shaped recess in this part then put other part with protrusion over back of bolt and tap with a small hammer to release. I hope this makes sense, just let me know if this works for you. It should get the bolt moving and is safer than trying to find random items and causing injury, I've added a fully assembled door bolt to print. either complete or just the bolt itself. I've includ... This hosted file keeps creator credit and license details.
Bonsai Planter (New HD Model with over 1,100,000 Triangles)
We attempted to design a beautiful and useful planter for your next bonsai (which we happen to love). It took several months to find the right plant to fit the planter box. This model, along with others, can be downloaded from http://www.gcreate.com/downloads/ . The photos show the planter printed at 200% although we could have printed it larger, which we will do as the plant grows. We are uploading a shelled model as well as a solid model. When printing the solid model you should set the infill to 0% and you have to cut out the top (or stop the print before it prints the top). The shelled model prints great at the full scale or 2x scale but it may be too thin at half scale. Depending on yo... This hosted file keeps creator credit and license details.
Automatic Transmission Model
Have you ever wondered how an automatic transmission works? I did, so I looked it up and then designed this desktop model. It has six forward speeds and one reverse. Real automatic transmissions have a hydraulic or electrical system that engages different clutches and brakes to shift gears depending on the driving situation. With this model you control those simplified brakes and clutches yourself. The clutch is actuated by sliding the drive shaft through to different positions (which each have two gear markings), while three separate brakes each also have two gear markings. You select a gear by engaging the brake and clutch position associated with your desired gear. See demonstration vide... This hosted file keeps creator credit and license details.
Resistor lead forming tool
If you like your resistor and diode leads to be bent uniformly and consistently, then this tool is for you. It also provides a useful task for the wee little ones in the house who want to assist you with your electronics projects. This hosted file keeps creator credit and license details.
Secret Shelf
Do you have stash of money? If you hide in this shelf, no one is finding! [URL Redacted] This hosted file keeps creator credit and license details.
Aztec Chief
This battle-hardened hero looks especially mythic in our new Sparkly Black and Sparkly Dark Blue MakerBot® PLA Filaments. This hosted file keeps creator credit and license details.
micro-sketch
Hi! This is my printable version of the classic etch-a-sketch / telesketch . A kind of plotter-toy. You can draw what you imagine rotating the X-Y knobs. It works great with a marker or a pen. The drawing area it's 15x10cms aprox. The X-axis acts moving the complete paper, inspired in the Prusa Y-axis (moving all bed) It has many parts and can print mostly without supports (i hate supports) I've arrange the parts in 6 files according to impression parameters and print order. Included a PDF with assemblig instructions and some tips . Included a ZIP file with al the STL files for each part. Also included the 123D Design files. See the Print Settings. And last: Sorry if my english it's not goo... This hosted file keeps creator credit and license details.
3D printable bottle and screw cap
Creative Tools Creative Tools supplies 3D printer and 3D scanner products incl filaments, accessories and support and also 3D software for leading CAD, modeling, animation, and rendering. Here we have a small bottle and screw cap that you can print on your 3D printer. Size: 95 x 95 x 40 Inner volume: 139 cm3 Plastic volume (with cap): 20.5 cm3 Thread: Screw cap uses same thread as common soda bottles By Creative Tools Home - YouTube - Things - #3DBenchy - Twitter - Facebook - Instructables - Instagram - Pinterest - Flickr - LinkedIn This hosted file keeps creator credit and license details.
Dark Mask - Jointed
Create your own articulated frightening mask. You just have to print two parts and fit the axis of the jaw. Then, add a thin elastic cord to open and close the jaw. More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/ Author: the original source This hosted file keeps creator credit and license details.
vise
main body is in four parts, glued together. parts will need to be scaled up and aligned to the print bed surface. the main screw, handle and caps required a brim for support. 3x .25-20 screws also needed. I also added a main body stl file incase you want to try and print it as a single feature. This hosted file keeps creator credit and license details.
Delving Decor: Medieval Barrels (28mm/Heroic scale)
Some barrels (in two sizes thus far) for fantasy tabletop gaming or dioramas. Shown with some Reaper miniatures to give an idea of scale. Enjoy! Designed in TinkerCAD: https://tinkercad.com/things/c6jyr9YaJ3C-medieval-barrels-multiverse28mm This hosted file keeps creator credit and license details.
Shishi Odoshi "Deer Scarer" Japanese Water Fountain - Fully Working
I was recently in the Portland Japanese Garden where I saw a pleasant Shishi Odoshi fountain. It fills with water until it tips over and dumps the water out, making a noise that's meant to scare away deer that might otherwise eat your meticulously manicured garden. I was inspired to try to create a miniaturized, indoor-scale version, complete with pump and reservoir so it really works - right on your desk! The basic theory of operation is simple: the main tube is weighted below the hinge and hollow above the hinge. Though the top is longer than the bottom, it still weighs less than the bottom when it's empty, so the tube sits upright. As the top of the tube fills with water, it eventually w... This hosted file keeps creator credit and license details.
LED bridge lamp
New design with universal segment is here the original source UPDATE 13.08.2016 - look for picture and zip file named "shades" Intention of this lamp is to be able to control shadows while doing assembly and soldering works. Instead of simply gluing LED strip to aluminium bar, I decided to make something fancy and inspiring. To me, the ArtDeco and imperial architecture (hello, Gotham City) are endless sources of excitement and admiration. I spent some time researching old Roman architecture on the Internet, to design the base for the bridge. I will soon add some magic into it - IR proximity sensors inside each segment to switch it on and off by the hands gesture and thr... This hosted file keeps creator credit and license details.
Air Raid Siren - hand crank version
There's a newer version of this design: Air Raid Siren - hand crank version 2 This is an old design! Printers and slicers had other tolerances back then. I have many users complaining in the comments. So be aware of that. This design is 100% 3D printed. Works fine but may have friction trouble when rotating fast! Be careful when using it! Dont touch the moving parts while they are rotating! This hosted file keeps creator credit and license details.
The Great Pyramid of Giza
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller than the Statue of Liberty, and as wide as 10 football fields, the Great Pyramid of Giza can be seen from space. Now with MakerBot's second curriculum unit, teachers and students, can download and 3D print their very own model for use in the classroom! Infill: 3% Shells: 2 Resolution: Standard This hosted file keeps creator credit and license details.
Working Micro Gear Heart Keychain
Based on Emmett's ever popular gear heart: the original source This version is about half the width of the original (50 mm), which means its 1/8 the volume and a much faster print (yay math!). i find it takes me ~2 hours to print one (and ~8 for the original) Rather than just being a straight scaling, this version has been tweaked so taht it will still rotate. The main differences are the number of gear teeth (much fewer, and larger), gear ratio (it now takes 2 rotations to realign, unfortunately) and pins (made much beefier, and they are all one length). Additionally, there is a hole through the tip so that it can serve as a keychain! Print them out by the dozen and give... This hosted file keeps creator credit and license details.
pencilpot-monster
small pencilpot-monster for keeping your pencils and pens in the office or on your schoolkid's table. You can poke pens into monster's eyesockets as well! This hosted file keeps creator credit and license details.
Drawing Robot - Arduino Uno + CNC Shield + GRBL
Warning: I'm getting more messages from builders of this robot saying that either the required software is not available or it doesn't work under Windows 11. I may eventually remove this "Thing" since I don't want people to invest time building a robot with no software support. Be warned, this robot is a lot of work and it may not be possible to operate it as newer versions of Inkscape, GRBL, UGS, and Arduino may present incompatibilities. If you think you have the software abilities to resolve conflicts, enjoy this project otherwise I suggest building a newer design where someone has updated the software. This design still presents useful documentation for the mechanical build of a drawing... This hosted file keeps creator credit and license details.
Parametric Music Box
CUSTOMIZER CHALLENGE CONTEST WINNER - Artistic Category This is a 100% printed customizable music box! Only 3D printed parts are used in the design and it can be assembled and disassembled via printed snapping mechanisms. The project originated when a friend of mine said that he'd only be interested in 3D printing once he can print a music box ;) Videos http://youtu.be/LUlovenI9xQ http://youtu.be/K_c3p24RRtQ (made by banthafodder7400) http://youtu.be/exNeQDz7f3g I'll try to keep the .scad file on this page updated but to help me to manage the design and to make it easier for others to contribute: https://github.com/wizard23/ParametrizedMusicBox Here is a Spreadsheet to help you to get the p... This hosted file keeps creator credit and license details.
Customizable Lithopane
Click "Open in Customizer" to turn the image of your choice into a Lithopane! We used the Mona Lisa, but you could use any photo you want. The Lithopane tool generates a 3D model that looks like a rough terrain map. Download the file, print it on your MakerBot Desktop 3D Printer, and you've got a picture perfect pane to hang on your window. Three cheers for the lithopane pioneers on original source, such as cymon and pp3dpNL! For more information on this old art form, check out the Wikipedia article here: http://en.wikipedia.org/wiki/Lithophane This hosted file keeps creator credit and license details.
OpenRC F1 car - 1:10 RC Car
Get electronics and hardware here: https://rcprinter.com/products/openrc-f1-hardware-kits Build guide: http://danielnoree.com/the-openrc-f1-build-guide/ Questions & Answers: http://danielnoree.com/openrc-questions/ OpenRC Electronics: http://danielnoree.com/openrc-electronics/ Consider supporting me on Patreon: https://www.patreon.com/DanielNoree Complete hardware/electronics lists and kits available here: http://danielnoree.com/openrc-electronics/ Please respect the license under which this project is released. Thank you! Other OpenR/C Projects: OpenR/C Quadcopter: the original source OpenR/C Truggy: the original source OpenR/C Touring Car: http://www... This hosted file keeps creator credit and license details.
Shopping Bag Handle
Handle for carrying one or more shopping bags. The slim version is slightly narrower for smaller hands and the wide slot version is designed for bags with slightly thicker handles. You may want to adjust the scale before printing. This hosted file keeps creator credit and license details.
"Braq" jointed dragon
A challenge for your printer!! "Braq" is a jointed dragon of 42 pieces. Once printed pieces only need an elastic cord 2 to 3mm thick to join them. Check the assembly instructions on this video https://youtu.be/pEerHkxMN2w Click here for more information and source files (blender) http://diwo.bq.com/dragon-braq/ (in Spanish) Author: http://www.soniaverdu.es/ New articulated head: the original source This hosted file keeps creator credit and license details.
Articulated Christmas Toys
A Christmas print. To decorate your house for the Christmas season we offer three jointed figures. They are printed at once without any additional support. Have fun painting them! More info: http://diwo.bq.com/bjd-figura-articulada-navidad/ Author: http://www.soniaverdu.es/ This hosted file keeps creator credit and license details.
Saber-Toothed Cat Skull
Just one look at the impressive skull of this massive feline and you’ll be glad it’s been extinct for 11,000 years. Walking the Earth alongside our human ancestors for millennia, saber-toothed cats’ impressive fangs were precision killing tools that helped earn them the scientific name Smilodon fatalis. With the intent of making the 3D printing ecosystem more accessible to educators, MakerBot Academy has selected Common Core Standards for English Language Arts and Mathematics that align with our 3D printed content. Our goal is to lower the barrier to 3D printing in the classroom by directing teachers to standards-aligned resources. We hope to make the process of incorporating 3D printing te... This hosted file keeps creator credit and license details.
Dragon Door Knocker
Makes a Dragon Knocker. Everyone will knock before entering in the room. https://youtu.be/xiMK-e_Cqm8 Choose between the three files: -knocker dragon with supports -knocker dragon without supports -knocker dragon eyes separate -knocker dragon eyes separate with supports Download Claws dragon: https://cults3d.com/es/modelo-3d/moda/dragon-claw Download sieve: the original source Painting: https://www.youtube.com/watch?v=FT5sFznu85E More info: http://diwo.bq.com/builds/aldaba-de-dragon/ In the relief of the base I used the dragon logo (protesic leg): https://github.com/davidsanfal/drakkar This hosted file keeps creator credit and license details.
Flexing battery holders with integrated spring
For my electronic projects I often need battery holders of various size and for different number of cells: single, multiple cells in parallel or in series, or serial lithium-ion type cells with connectors for balanced charging between the cells. So the project here was to generate fully parametrized, printable battery holders for cylindrical cells of arbitrary size and number. The additional challenge for me was to have the battery sit firmly in the holder without the use of the metallic spring that is usually found at the minus pole. In this design the metallic spring is replaced by a flexible printed curled structure, which presses the contacts firmly to the battery. This plastic spring f... This hosted file keeps creator credit and license details.